BARCO F80-Q9 projectors

https://img.productz.com/771051/barco-f80-q9-1-preview.jpeg

Main characteristics

  • type: DLP laser phosphore
  • resolution: 2560 x 1600 (16:10, WXGA+ native)
  • brightness: 9’000 lumen (center)
  • contrast: 1200:1
  • image: 4K UHD @60 Hz, WXGA+ @120 Hz
  • input: HDBaseT, HDMI 2.0, DP 1.2
  • lens shift: up to 125% vertical, 50% horizontal
  • remote control: IR, LAN, XLR
  • more info: https://www.barco.com/en/product/f80-q9#specs

Accessories

  • lens: GLD 0.85-1.06:1 with motorized focus & zoom (other lenses available on rent)
  • rigging frame with clamp and manual pan/tilt/yaw setting screws
  • IR remote control
  • Projector Toolset (https://www.barco.com/en/support/projector-toolset) to use with PureLink HDBaseT converters

Troubleshooting

Lens focus & zoom do not work
  • Try to remove the lens and gently mount it again, util it snaps to lock position
Projector does not respond to IR remote controller
  • Make sure that the remote controller is turned on by pressing the side upper left button (red LED lights up)
  • Parasitic IR light disturbs the communication. If the OptiTrack system is on, switch off the camera IR LED’s.