ASM steel band hoists

PLEASE NOTE: THE ASM STEEL BAND HOISTS SHOULD NOT BE USED BEFORE YOU HAVE BEEN INTRODUCED TO THEM!!

The hoists are controlled by the ASM remote according to the following procedure:

  • Switch on the remote with the main switch or (if it is already on or displays any error message) reset it.
  • The remote app starts automatically. Touch anywhere on the screen to log in.
  • Select the ‘ias’ user (no password). With this user you cannot edit any setting.
  • Select either ‘Zuganwahl’ or ‘Gruppen’.
  • Choose the hoist number according to its label.
  • ‘Zuganwahl’ (left): select one or several hoists you want to drive simultaneously.
  • ‘Gruppen’ (right): select one pre-selected hoist group.
  • To rise or lower the hoist, first press on the joystick button, then move it up, resp. down.
  • To shut down the ASM remote touch the ‘zur├╝ck’ button until you reach the start screen. There press ‘Aus’ and confirm with ‘Ja’. When the computer is off, switch off the main power switch.
Last updated bymartin froehlich